1000ABA Film Blowing Mahine at 2025 QingDao Exhibition
2025-07-08This video was shot at the 2025 Qingdao Exhibition. The video was shot 180 degrees around the right side of the 1000ABA film blowing machine, and the film discharge effect of the die head and the transparency of the film can be fully seen.
The display on the top of the machine also displays the specific production data in detail.
For exhibition information, please refer to:Yuexing at the 2025 Qingdao Gravure Printing Exhibition with the 1000ABA film blowing machine!
Expert Insights & FAQ
The extruder screw diameter determines the output capacity (kg/hr), while the die head diameter and Blow-Up Ratio (BUR) determine the film's layflat width. To spec a machine, you should define your target width and thickness first, then work backward to determine the required output and screw size. How do I spec the right extruder size for my target film width?
Extruder size is determined by output demand: a 55mm screw delivers 80–120 kg/hr, while a 90mm screw reaches 300–400 kg/hr. Always spec the machine by working backward from your target layflat width and film thickness. film-blowing-machine-extruder-calculation
By upgrading to servo drive systems (saving 28-34% on haul-offs), implementing OEE monitoring, and optimizing IBC cooling systems, manufacturers can significantly reduce energy draw per kg of film. Energy saving blown film tips
Previous:Yuexing at the 2025 Qingdao Gravure Printing Exhibition with the 1000ABA film blowing machine!
